How To Maintain The Slitting Machine

1. Check the thickness of the brake friction plate of the slitting machine. If it is severely worn, it needs to be replaced
2. Check if the linear guide rails of the slitting machine are clean, and clean them if necessary
3. Check if the drive belt of the slitting machine is maintained at its proper tension
4. Check whether there is any air leakage in the air circuit of the slitting machine, whether the air filter is clean, and clean the filter element at least once a month
5. Check the surface of all outer rubber rollers of the slitting machine and do not come into contact with the slitting tool to avoid damaging its surface. Remember to use 1 liter of cleaning solution per week (usually warm water with low surface tension soap or solvent) and gently wipe the roller with a lint free cloth
6. Check the exhaust fan filter of the slitting machine. If there is too much dust and dirt attached and it is not cleaned properly, replace it in a timely manner
7. When the roller is dirty, it can be cleaned with a fine yarn cloth dipped in industrial alcohol, but be careful not to use alcohol to wipe some old parts of the slitting machine, so as not to cause rust