Introduction To The Working Principle Of The Cross Cutting Machine

A cross cutting machine is a mechanical device that divides wide paper, mica tape, or film into multiple narrow strips of material. It is commonly used in papermaking machinery, mica tape for wires and cables, and printing and packaging machinery.
working principle:
1. The cross cutting machine needs to perform fixed length cutting processing on the entire roll or sheet of raw materials, such as plastic packaging materials, packaging cartons, steel plates, films, leather, wood chips, etc., all of which require fixed length cutting control.
2. The cutting length can be continuously set, and if there is an error in the actual cutting length, it is easy to calibrate it by setting parameters.
3. Slitting control is divided into two types: static and dynamic slitting: accurately stopping when the set length is reached, then static slitting processing, and restarting operation after slitting; When the set length is reached, the cutting signal is not stopped and the cross cutting machine dynamically cuts and processes the material during its movement.