Knowledge

Using a Slitter Rewinder

Jun 20, 2025 Leave a message

Self-adhesive material - Rewinding of self-adhesive labels is a method of receiving web material after printing and processing. The rewound labels may be finished or semi-finished products. Self-adhesive material requires rewinding after printing and processing in the following situations:

a. Rewinding of finished labels after printing and processing. Rewound labels are used directly on automatic labeling machines, printers, and electronic scales.

b. Rewinding of semi-finished labels. Labels need to be reprinted or processed and then reprocessed on a labeling machine or processing machine. There are two types of rewinding methods on labeling machines:

① Intermittent rewinding. Intermittent rewinding is used in flatbed and rotary labeling machines with intermittent paper feed. The rewinding principle is that when the printed web reaches a certain length, a sensor sends a signal, rotating the take-up roller and starting rewinding. When the web shortens after rewinding, a sensor sends a signal to stop rewinding, causing the take-up roller to stop. Rewinding is repeated over and over again. The disadvantage of intermittent rewinding is that there is no tension during rewinding, resulting in loose paper rolls. Paper rolls that require tight rolls and uniform tension need to be rewound on a rewinder. If labels need to be processed a second time on rotary equipment, an intermittent rewinder is a separate accessory.
② Continuous rewinding: This is performed on the rewinder of a rotary labeler. Because the rewinding of the web occurs simultaneously with other processes, and some rewinders are equipped with tension control systems, the rewound roll is very tight. When reprocessed on the processing machine, the processing accuracy is not affected by the tightness of the paper.

c. Rewinding on a slitter. Currently, many roll labels are printed on large rolls on labeling machines and then wound into large rolls. The large rolls are then reprocessed and rewound on a slitter.

Duplication on a slitter serves two purposes: first, to separate multiple labels into individual labels; second, to duplicate a single label into smaller labels of a certain size and quantity, facilitating label application on related equipment such as automatic labelers, barcode printers, and electronic scales.

Send Inquiry