Knowledge

Automatic Slitting Machine Precautions

Jun 18, 2025 Leave a message

1. Before starting the machine, ensure that the voltage, current, and hydraulic pressure are correct and stable.
2. Before the machine is ready for operation, all personnel must be notified to leave the machine and ensure personal safety before starting the machine.
3. During operation, avoid touching the film roll or roller core with your hands to avoid getting your hands caught and causing personal injury.
4. During operation, avoid scratching or cutting the roller core with a knife or hard objects.
First Packaging: Before putting the machine into operation, check that all working positions are properly adjusted. Lubricate any areas that require lubrication in advance. Check that the cutting tools are sharp.
After everything is normal, run the machine empty to check for any anomalies. Enter the order to be processed into the computer in advance for inspection. After the machine is put into operation, adjust the machine to optimal working condition according to production conditions to ensure that the slitting machine has appropriate indentations, slits are burr-free, and the trimming is properly positioned on both sides. Ensure smooth paper feeding and discharging on the cross-cutting machine and accurate cutting lengths. Also, monitor the operation of the longitudinal and transverse cutting machines, which are integrated into production management, to prevent paper jams and defective products.

After work is completed, promptly clean dust and paper scraps from the equipment, inspect the cutting tools and grinding wheels, drain any accumulated water from the oil-water separator and air tank, and inspect any operating components for any abnormalities. Then, disconnect the power supply according to the manual and maintain the computer operating system.

Send Inquiry