Film slitting machines are primarily effective at slitting film. However, some common problems may arise during operation. Let's examine the causes of slitting.
After slitting film, the slitter divides it into two sections, the inner and outer ends, for rewinding. The rewinding stations at each end are mounted on a crossbeam controlled by a hydraulic cylinder. Under the control of the hydraulic cylinder, the crossbeam rotates back and forth within a certain angle range through the elastic movement of the cylinder's piston and connecting rod, thereby ensuring the required pressure for normal rewinding and loading and unloading. This article analyzes the automatic control process and the problems that may arise.
During slitting machine operation, the inner and outer crossbeams often move simultaneously toward the unwinding direction, causing the product being rewound to move along with them. This ultimately causes the rewinding roller to separate from the product, resulting in a loss of rewinding pressure. This causes the slit film to deviate from the outer layer of the product, leading to film breakage and production interruption. This problem often occurs irregularly, sometimes immediately after the machine is started up and sometimes after the product has been slit and rewound to the desired length.
Causes of Film Slitter Slitting
Jun 03, 2025
Leave a message
Send Inquiry
